DigiCase System

The DigiCase System is modular like the Standard System. This means it can be used it in different ways, and also combined with other DigiCase Systems.

A DigiCase System consists of the following components:

• 1 DigiCase controller,
• 2 DigiCase mats
• Cable set

Specifically for DigiCase, new low-density mats of 4 x 1 or 1 x 4 meter have been developed. These mats can be rolled up.
Besides the new low-density mats, the existing standard mats of 1 x 2 meter can be used with the DigiCase as well, the classic as well as the lightweight.

ChampionChip strongly advises against using triathlon mats: they only have half of the receive antennas and thus make a very low-density timing point.
Timing Kit mats cannot be used in a DigiCase set-up at all.

The DigiCase System is a low-cost version of the Standard System

One DigiCase Mat is 1 meter wide and 4 meters deep, or 4 meter wide and 1 meter deep. The timing location has to be a narrow chute and participants must pass through one at a time. There is no back up line.

With more DigiCase Systems it is possible to build several chutes next to each other. They can be combined to build two 1 x 4 meter lines next to each other, separated by at least 0.5 meter. Each line can be seen as a main or back up line.

Two DigiCase Systems can be combined to build a 2 x 2 meter main line and a 2 x 2 meter back-up line.

Two DigiCase Systems can be combined to build a 2 x 2 meter main line and a 1 x 4 meter back-up line.