ChampionChip Digital System

The Standard System provides a 4 meter wide timing location, including a main and back up line.

A Standard System consists of the following components:

• 2 Controllers: digital DigiBoxes
• 8 Classic antenna mats
• Cable set

4 meter wide timing location

Each Controller is attached to 4 antenna mats.
The Standard System can handle all possible densities of chips in the events timed. The highest possible density of chips occurs during the start of a marathon, when an average of 700 people a minute cross a 4 meter wide section.

The Standard System is modular, which means it can be used in different ways and combined with other Standard Systems.

A high density of chips occurs during the start of a marathon

One Standard System can be used to create a 4 meter wide timing location, including a main and a back up line.

One Standard System can be used to build two 2 meter wide timing locations. We recommend that this should only be used at split points because there is no back up line.
(The picture shows just one one 2 meter wide timing location.)

Two Standard Systems can be combined to build an 8 meter wide timing location, including a main line and a back up line. This is the widest possible set up with Controllers on both sides of the lines.

Four Standard Systems can be combined to build a 16 meter wide timing location, with a main line and backup line. Here 4 out of 8 Controllers will be located in the middle of the lines. A physical barrier must protect this isle of Controllers, to prevent participants from hitting the controllers.